SILICONE ANTIFOAM-1311
INTRODUCTION
It is well known that conventional silicone foam control agents used in the papers, textiles, metal working, coating and adhesion processes, cause many disadvantage results. Especially in the textile jet dyeing, due to the high temp (120-130oC) and shear conditions, silicone oil always plating out on the inside of dye bath and cause severe spot and shading problem on the textiles. Now the new compounds ANTIFOAM-1311 has been found and designed for used in almost of the foam control case without introducing spots and other problems.
TYPICAL PROPERTIES
Appearance .....................................................................Opaque Liquid
Specific Gravity 25oC .....................................................1.01 ± 0.03
Activity Content .........................................................….10 ± 1
Stability.........................................................................…Excellent
APPLICATIONS
ANTIFOAM-1311 is often added to the processing system before foaming start as foam inhibitor. Although effective concentration vary with each foaming system. ANTIFOAM-1311 is effective in the concentration as low as 50 ppm. It must be noted that ANTIFOAM-1311 reaches maximum antifoam efficiency over 45oC. So the optimum foam control in foaming systems must over 45oC.
Products are Made in Taiwan not in China
