silicone Mold for resin or low melted alloy specially for shoes outsole use
Two Component silicone is an excellent mold making silicone rubber, due to easily process and accurate recreation to its origin shape.
RTV-II has high temperature and chemicals resist. So it can be used in most mold material application as wax, gypsum, cement, resin and low melted alloy.
Carol RTV-II could be used in copy of electronic and motor part, decoration Architecture… etc.
SILICONE RUBBER RTV-826T MOLD-MAKING SILICONE
Application : Mold for resin or low melted alloy (specially designed for PVC outsole mold use)
Temperature range 200 to 300 o C
RTV-826T Application : Mold for resin or low melted alloy
Viscosity : 45000 cps
Type : Two Component Condensation Type
Typical Properties (after cured): Softer and better elongation
Appearance: Opaque, paste
Specific Gravity : 1.16g/cm3
Durometer hardness(ASTM D2240) : 22 (Hardness Shore A)
Tensile strenghth(ASTM D412): 5.0 N/mm2
Elongation(ASTM D412) : 450﹪
Tear strength(ASTM D624) : >12 N/mm
Shrinkage : <03﹪
Working Time : 10-30 min.
Released Time : 2~4 hr Curring Time : 24 hr
Packaging
RTV-826T Available in 200 KG/Drum，25 KG/Pail
Harder C-5 Available in 0.5 KG or 18 KG
Harder C-5 Dosage about 1.5 ~ 3.5%，for operation requirement
