Soft silicone outsole molding for all kinds of outsole make use SiliCONE RUBBER RTV-826T Application : Mold for resin or low melted alloy (specially designed for PVC outsole mold use)
Temperature range 250 to 300 o C
RTV-826T Application : Mold for resin or low melted alloy
Viscosity : 45000 cps
Type : Two Component Condensation Type
Typical Properties (after cured): Softer and better elongation
Appearance: Opaque, paste
Specific Gravity : 1.16g/cm3
Durometer hardness(ASTM D2240) : 22 (Hardness Shore A)
Tensile strenghth(ASTM D412): 5.0 N/mm2
Elongation(ASTM D412) : 450﹪
Tear strength(ASTM D624) : >12 N/mm
Shrinkage : <03﹪
Working Time : 10-30 min.
Released Time : 2~4 hr
Curring Time : 24 hr
Packaging :
RTV-826T Available in 200 KG/Drum，25 KG/Pail
Harder C-5 Available in 0.5 KG or 18 KG
Harder C-5 Dosage about 1.5 ~ 3.5%，for operation requirement
